Ardesia floor Microcemento monocomponente sacchi da 18 kg

1. PRODUCT FEATURES

ARDESIA FLOOR is a special mineral powder designed to create prestigious indoor flooring without

any joint. Its great flexibility allows to obtain continuous floor-wall solutions of high-quality design.

ARDESIA FLOOR gives a surprising sensation of comfort that no type of synthetic resin flooring is

able to convey.

The ARDESIA FLOOR application cycle has the great advantage of being a one component powder

product, to be mixed only with water, used both as smoothing mortar and as a finishing coat.

2. COMPOSITION

Hydraulic binders with very high mechanical strength, selected silica aggregates, fillers, special

polymers and additives.

3. APPLICATION

1. In case of existing ceramic floor, perfectly clean and degrease the substrate and carefully check

its perfect cohesion. Apply a coat of EOS PRIMER ES with a roller or brush, evenly distributing the

fine aggregate it contains and let it dry for at least 24 hours.

In case of cementitious screeds, vacuum up all traces of dust and debrits. Apply one or two coats

of EOS PRIMER AF diluted with water in a ratio from 1: 3 to 1:8 depending on the absorption of the

substrate.

2. Slowly add the content of a 25 kg bag of ARDESIA FLOOR into 6.5-7.0 liters of clean water, mix

with a slow speed drill for at least 3 minutes, avoiding the formation of lumps; let the mix rest for

about 5 minutes, remove any undispersed powder from the container and remix briefly. The

pigment paste (if used) must be added to the mixing water before mixing the powder. For very

deep colors with pigment paste dosages higher than 250 ml, it is recommended to reduce the

mixing water by the same volume of pigment paste used.

3. Spread the first leveling coat of ARDESIA FLOOR with a metal trowel, lay the fiber mesh by

squeezing it into the fresh product with the trowel, taking care to overlap it at the joints for at least

5 mm.

4. After 24 hours, apply a second layer trying to level and obtain a perfectly homogeneous and

smooth surface.5. Spread the last layer of ARDESIA FLOOR to obtain the desired aesthetic effect. It is essential at

this stage to take great care in smoothing the product, avoiding very high pressure with the trowel

(as usually done with a marmorino coat) which could cause unpleasant imperfections of dark

shades.

6. After 24-48 hours, sand the product with a vacuum sander, using nr. 120 sandpaper, until the

desired degree of fineness is obtained.

7. Vacuum perfectly all traces of dust and processing residue. Clean the entire flooring with a damp

cloth.

8. Finish the surface with two coats of EOS LIQUID GLASS or EOS POLYGLOSS at a distance of

about 24 hours from each other.

Avoid applying the product with relative humidity higher than 80%; do not apply on damp substrates

or where it has been ascertained the presence of rising humidity. Assure with a carbide hygrometer

that the humidity content of the substrate is less than 3% b.w. (the sample must be taken at a depth

of about 4 cm).

4. TECHNICAL DATA

33-35% on the total powder weight (6.5-7.0 liters each 25kg bag)

5. STORAGE

The shelf-life of the product is 12 months in its original sealed packaging, if stored in a dry place,

away from humidity. Store at temperatures between +5°C and + 35°C.

________________________________________________________________________________________________________________________

The characteristics and recommendations shown in this Technical Data Sheet must be considered as representative of the current

production and not as technical specifications. Although all information contained in this document is believed to be reliable and

representative of the best data available to us, no warranties and assurances are implicitly or intentionally given as to their correctness

and completeness or the merchantability and suitability of each chemical compound for the particular use or purpose, or that each

chemical compound or its use is not subject to third party claims for infringement of patents and intellectual property rights. The user is

required to conduct adequate investigations and tests to verify the suitability of each product for its intended use.